From: Epplin John A <EpplinJohnA@jdcorp.deere.com>
Subject: RE: COZY: chapter3 practice part
Date: Wed, 13 Oct 1999 09:37:18 -0500

Dewayne:

Don't worry about the 2 hours, you will get much faster.  Also, 72 is about
min for a good lay-up, I know some people will say it is too low, probably
is for perfection but after all we are only building airplanes.

Does anyone know where that flat plate goes?  I have cut pieces from it
several times for shims and tabs to screw to etc.

John Epplin   Mk4  #467 still sanding!

> -----Original Message-----
> From:	dewayne morgan [SMTP:dmorgan@mis.net]
> Sent:	Wednesday, October 13, 1999 9:20 AM
> To:	cozy_builders@canard.com
> Subject:	COZY: chapter3 practice part
> 
> builders,
> 
> May I substitute  h45 PVC foam in place of the green foam in the practice
> confidence layup in chapter 3 ?? 
> 
> Also, what is the 10x16 flat part made in chapter 3 used for later?  Mine
> weight 10.75 ounces, but took me two hours instead of 30 minutes (at 72
> degrees). Am i overdoing this or is that expected at that temperature and
> my level of experience?
> 
> thanks
>  

